| Voltage: | 380V |
|---|---|
| Warranty: | 2 Years |
| After-sales Service: | Field Maintenance and Repair Service, Field Instal |
| Axial Length (Foil Width): | 1,400mm |
| Max. Od. of Finished Coil: | 1,000mm |
| Conductor Foil Material Od.: | 1,000mm |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Power Industry Equipment Automatic Dry Type Transformer Foil Winding Machine
Introduction
Power Industry Equipment Automatic Dry Type Transformer Foil Winding Machine BRJ1400-2 is used to wind transformer foil coils and similar products, the foil conductor can be copper or aluminum strip. This kind of foil winding machine can wind one or two layers of foil conductor and one or two layers of insulation material (such as paper or similar material). Bus bars are welded with TIG welding process. The automatic foil edge alignment makes sure that the coil edges are straight and smooth. Control system is based on PLC. It is easy to operate the machine through a touch screen.
Main Components
1.Main frame
2.Winding unit
3.Foil decoiler
4.Insulation decoiler
5.End-fill strip feeder
6.Cleaning system
7.Cutting system
8.Foil deburring system
9.Edge alignment system
10.Automatic welding unit
11.Electronic control system
12.Pneumatic system
Technical Parameters
Typical standard specifications of BRJ1400-2 are shown below, however these can be easily modified as requested.
|
Axial Length (foil width): |
1,400mm |
|
Max. OD. of Finished Coil: |
1,000mm |
|
Conductor Foil Material OD.: |
1,000mm |
|
Conductor Foil Material ID.: |
500mm |
|
Number of Conductor Decoiler: |
2 |
|
Length of Conductor Decoiler: |
1,450mm |
|
Conductor Decoiler Shaft: |
adjustable Dia. range 400-520mm |
|
Winding Spindle: |
80×80×1750 mm |
|
Welding Mode: |
TIG |
|
Cutting Mode: |
Electric disc shear |
|
Number of Insulation Decoiler: |
2 |
|
Insulation Material OD.: |
≤400mm |
|
Insulation Material ID.: |
76mm |
|
Width of insulation material: |
1,450mm |
|
Insulation Decoiler shaft: |
Expandable (pneumatic open/close action) |
|
End-fill Strip Feeder: |
8 |
|
User Interface: |
10inch (254mm) touch screen industrial PC / access controller |
|
Counting Turns Range: |
0 - 9999.9 |
Good after sale services are provided for the machine. The warranty period of the machine is 12 months. During the warranty period, if there is anything wrong with the machine, we will guide you how to eliminate the problem and provide you with components if needed, and all is for free. Beyond the warranty period, we also provide technology support for the machine, if some components are needed, we will provide and charge according to the cost of the components.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}